Troubleshooting

Binfile Error:

	Check that the module has power
	Check that the module has the right switch settings
	Make sure that you press the module reset button hard enough
	Check that the module is properly oriented
	Check that the serial cable is connected to the computer and the module
	Check that the correct Com port selected
	Check that the correct target is selected (Turbo or Standard if available)
	If you using a Turbo version make sure that no other major applications are running.

Connection Error:

	Check that the module has power
	Check that the module has the right switch settings
	Make sure that you press the module reset button hard enough
	Check that the module is properly oriented
	Check that the serial cable is connected to the computer and the module
	Check that the correct Com port selected
	Check that the correct target is selected (Turbo or Standard if available)
	If you using a Turbo version make sure that no other major applications are running.

Operation valid only when the Com port is open:

	Check to make sure that no other software is using the Com port you have 	
selected. Eg: MiniIDE, MicroWIDE, HyperTerminal, ICC11, ICC12... 

	Check that you don't have an internal/external modem on that Com port. If 	
so then change Com port of the module.

Failed to verify:

	Check the write protect switch.
	Try to reload the file.
 
